Sony PCG-R505DSK - Manual (Page 210)

VAIO® R505 SuperSlim Pro™ Notebook Quick Start
210
the data transfer speed, move your notebook away from obstructions or
closer to any Access Point you may be using.
❑ If you are using a Wireless LAN Access Point, the device may be
temporarily overloaded depending on the number of other devices
communicating via the access point.
The communication speed is interrupted or slowed down
when MPEG2 data is transferred.
The typical effective data transfer speed via an access point is 4-5 Mbps when
adhering to the IEEE802.11b standard. High-rate stream transfers with MPEG2
data may lower this rate.
Data transfers are interrupted.
Data transfer interruptions may occur with large files. Check if the access point
connection is intact. Do the following:
1 Click Start and point to Programs.
2 Select ORiNOCO, and click Client Manager. The ORiNOCO Client
Manager window opens, displaying the connection status.
The Peer-to-Peer connection is different from the one I
selected.
If the second computer in a "Peer-to-Peer Group" wireless connection specifies a
different setting from the first computer, the settings from the first computer take
priority.
Also, an encryption key may be required to access the network. Ask the person
who created the network for the key and try reconnecting to the network. When
prompted, enter the key.
The computer connects automatically to a Wireless LAN
Access Point.
If the Wireless LAN Access Point security setting is not specified at the factory,
the access point may connect automatically upon installation. This is a factory
specification, and not a malfunction.