Sony VPL-HW30ES - Manual (Page 75)

75
Oth
er
s
Specifications
System
Projection system
SXRD panel, 1 lens, projection system
LCD panel
0.61-inch (15.4 mm)
SXRD panel 6,220,800 pixels
(2,073,600 pixels
× 3)
Lens 1.6 times zoom lens (manual)
f=18.7 mm to 29.7 mm
F2.52 to F3.02
Lamp
200 W Ultra High Pressure Lamp
Projection picture size
40 inches to 300 inches (1,016 mm to
7,620 mm) (measured diagonally)
Acceptable video signals
15 kHz RGB/component 50/60 Hz,
Progressive component 50/60 Hz,
480/60i, 576/50i, 480/60p, 576/50p,
720/60p, 720/50p, 1080/60i, 1080/50i,
1080/24PsF (48i), 1080/60p (HDMI
input only), 1080/50p (HDMI input
only), 1080/24p (HDMI input only)
Acceptable computer signals
fH: 19 kHz to 72 kHz
fV: 48 Hz to 92 Hz
Maximum resolution 1,920
× 1,080
(HDMI input only)
For details, see “Preset Signals”. ( 1
page 77)
Input
Y P B /C B P R /C R
Component: phono type
Y with Sync: 1 Vp-p±2dB sync
negative (75 ohms terminated)
P
B
/C
B
: 0.7 Vp-p±2dB (75 ohms
terminated)
P
R
/C
R
: 0.7 Vp-p±2 dB (75 ohms
terminated)
HDMI
Digital RGB/Y C
B
(P
B
) C
R
(P
R
)
INPUT A
HD D-sub 15-pins
Analog RGB/component:
R/C
R
(P
R
): 0.7 Vp-p±2 dB
(75 ohms terminated)
G: 0.7 Vp-p±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p±2 dB sync
negative (75 ohms terminated)
B/C
B
(P
B
): 0.7 Vp-p±2 dB
(75 ohms terminated)
SYNC/HD: Composite sync input:
TTL level, positive/ negative
Horizontal sync input: TTL level,
positive/negative
VD: Vertical sync input: TTL
level, positive/negative
3D SYNC
RJ45 connector
IR IN
Minijack
REMOTE
RS-232C: D-sub 9-pins (female)
General
Dimensions
407.4 mm
× 179.2 mm ×
463.9 mm (16
1
/
8
Ч 7 1
/
8
Ч 18 3
/
8
inches) (w/h/d)
Mass Approx. 10 kg (22 lb 1 oz)
Power requirements
AC 100 V to 240 V, 3.0 A to 1.3 A,
50/60 Hz
Power consumption
Max. 300 W
Standby mode: 8 W
Standby mode (low): 0.5 W
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage humidity
10% to 90%
Supplied accessories
Remote control RM-PJ20 (1)
Size AA (R6) manganese batteries
(2)
AC power cord (1)
Lens cap (1)
Operating Instructions (1)
3D glasses* (2)
USB charging cable* (1)
(G2551-0077-00/-01 or
APY5244-010020/SONY)
(1.2 m)
Câble de charge USB* (1)
(G2551-0077-00/-01 ou
APY5244-010020/SONY)
(1,2 m)
Pouch for the 3D glasses* (2)
3D Sync Transmitter* (1)
Connecting cable* (1)
(LAN(M)SH-LAN(M)SH-L40/
SONY) (12 cm)
Stand* (1)