Sony HCD-EX5 - Manual (Page 11)

CD
11 GB
Uppercase letters/
blank space/symbols
Lowercase letters/
blank space/symbols
Numbers
Selected AB
Selected ab
Selected 12
Other operations
To Do this
Check the
program order Press . or > repeatedly
during Program Play.
Check the total
number of
programed tracks Press TIME on the remote in
stop mode. The total number of
programed tracks appears,
followed by the last programed
track number and the total
playing time of the program.
Cancel Program
Play Press PLAY MODE on the
remote in stop mode repeatedly
until “PROGRAM” and
“SHUFFLE” disappear.
Add a track to the
end of the program
in stop mode Do steps 3 and 4.
Erase a track Press CLEAR on the remote in
stop mode. Each time you press
the button, the last programed
track is erased.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, switch
the function to CD, then press NX (or CD N on
the remote).
• “– –.– –” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Labeling a CD
— Disc Memo
You can label up to 100 CDs with titles of up
to 20 symbols and characters. Whenever you
load a labeled CD, the title appears.
1
Press FUNCTION repeatedly to switch
the function to CD.
If “SHUFFLE” or “PROGRAM” appears,
press PLAY MODE on the remote
repeatedly until both disappear.
2
Press NAME EDIT/SELECT on the
remote in stop mode.
The cursor starts flashing.
3
Press NAME EDIT/SELECT on the
remote repeatedly to select the desired
type of character.
Type of character Select
continued