Sony PCG-Z505JEK - Manual (Page 7)

Supplementary Information 7
Using the Touchpad
In addition to using the left and right buttons for mouse clicks, you can
tap on the touchpad to indicate mouse clicks. By default, the tapping
feature is disabled. If you wish to turn on the tapping feature, double-
click the Mouse icon in the Control Panel, select the Tapping tab, and click
the check box to enable tapping.
A
Enabling Smart Connect
Your computer comes with pre-installed Smart Connect software. Before
using Smart Connect, follow the instructions below to enable the
software:
1
Click the Windows Start button.
2
Select Programs, Smart Connect, and then click Smart Connect
Switch. The Smart Connection Switch window appears.
3
(For Windows 98) Select the Enable Smart Connect check box, and
then click OK. Smart Connect is available for use in approximately
five seconds. (For Windows 2000) Select either VAIO mode or STD
mode. Smart Connect is available for use immediately.
When you use Smart Connect to connect two VAIO computers, you must
assign each computer a unique name by which it can be identified when
the two computers are networked. See the Smart Connect Help for more
information. The VAIO
® Z505 SuperSlim Pro™ Notebook User Guide also
contains information on using Smart Connect.
Device Manager
You may notice that under Network Adapters on the Device Manager tab,
two of the network adapters are disabled in Windows 98. Your computer
ships this way to enable faster startup. To enable these adapters, follow
the instructions under “Enabling Smart Connect” and “Enabling a
Network.” In Windows 2000, the network adapters are enabled.