Sony PCG-FX240K - Manual (Page 59)

Selecting the Display Mode
59
Changing the Window Design of Sony Software
To change the window design
1 Click the Start button, point to Settings, then point to Control Panel.
2 Click UI Design Selector.
3 Click << or >> and select the desired design.
4 Click Apply.
5 The “UI Design Selector” window design changes. The window design for
your Sony software will match the “UI Design Selector” window.
6 To try another selection, click << or >> and then click OK.
7 The “UI Design Selector” window closes and the Sony software window
design displays.
✍
You may not be able to display the notebook LCD screen and an external display or
projector at the same time, depending on the types of computer displays and
projectors you are using.
If the display resolution of your notebook is more than 800 x 600 dots, a part of the
image will not show up on your TV display. To see the hidden area, move the cursor on
your notebook. To display the full image, change the display resolution settings to 640
x 480 dots.
Turn on the notebook after you turn on the peripheral devices.
✍
This feature is available with UI Design Selector-compatible software only.