Press menu. the main menu appears on the screen – Sony FWD-42PX2 User Manual

Page 73

Advertising
background image

23

(GB)

Watching the Picture

Input Signal, Picture Mode and
Display Status Information

Input signal and Picture Mode information appear on
the screen for about five seconds when the power is
turned on or when the input signal is switched.
To disable this function, follow the steps below.

1

Press MENU.
The main menu appears on the screen.

2

Press

M/m to move the cursor (yellow) to

“CUSTOM SETUP” and press ENTER.
The CUSTOM SETUP menu appears on the
screen.

3

Press

M/m to move the cursor (yellow) to

“Display” and press ENTER.
The following menu appears on the screen.

CUSTOM SETUP

Power Saving:

Speaker Out:

Closed Caption:

Display:

Color Matrix:

HD Mode:

RGB Mode:

Sync Mode:

Remote

Input

Setting: Selectable

Standard

Off

Off

Off

Y/PB/PR

1080i

DTV

H/Comp

Set

ENTER

Exit

MENU

Select

Off

On

4

Press

M/m to set “Display” to “Off,” then press

ENTER.

To display the information
Set “Display” to “On” in step 2 above, then press
ENTER. The factory default setting is “On.”

Note

You can display the input signal information and the
time anytime by pressing the DISPLAY button on the
Remote Commander, regardless of the above setting.

Advertising