Sony FWD-42PX2 - Manual (Page 77)

27
(GB)
Gamma Correct.
Balances the light and dark portions of pictures
automatically.
1
Select “Gamma Correct.” with M/m and press
ENTER.
The following menu appears on the screen.
PICTURE/SOUND CONTROL
Adjust Picture
Gamma Correct.:
Reset
Set ENTER Exit MENU Select
High
Mid
Low
2
Select the Gamma Correct. mode with M/m.
High: Sets the Gamma Correct. to high.
Mid: Sets the Gamma Correct. to medium.
Low: Sets the Gamma Correct. to low.
3
Press ENTER to return to the Adjust Picture
menu.
Notes
• You cannot adjust Chroma and Phase when an RGB
signal is input.
• You cannot adjust Phase when a component signal is
input.
• You cannot adjust Phase with a PAL, PAL-M,
PAL-N, PAL60, or SECAM color system.
• You cannot adjust Phase when a black-and-white
signal is input.
Adjusting the Picture
Restoring the Adjust Picture Menu
Items to Their Original Settings
1
In the Adjust Picture menu, press M/m to move
the cursor (yellow) to “Reset” and press ENTER.
The following menu appears on the screen.
PICTURE/SOUND CONTROL
Adjust Picture
Gamma Correct.:
Reset
Mid
Set ENTER Exit MENU Select
Cancel
OK
2
Press M/m to move the cursor (yellow) to “OK”
and press ENTER.
The Adjust Picture menu items are restored to
their factory presettings.
Note
The values set for Color1 – 3 of Color Temp. will not
be cleared.
To cancel the reset function
Press MENU before pressing ENTER. Alternatively,
select “Cancel” with
M/m and press ENTER.