Sony FWD-42PX2 - Manual (Page 79)

29
(GB)
4
Press M/m to move the cursor (yellow) to “Auto
Wide” and press ENTER.
The following menu appears on the screen.
SCREEN CONTROL
Wide Setup
Auto Wide:
4:3 Mode:
On
Wide Zoom
Set ENTER Exit MENU Select
Off
On
5
Select the Auto Wide setting with M/m.
Off: Images are reproduced as-is.
On: The image is enlarged and displayed in the
most appropriate aspect ratio.
6
Press ENTER.
The screen returns to the screen shown in step 3.
7
Select “4:3 Mode” with M/m and press ENTER.
The following menu appears on the screen.
SCREEN CONTROL
Wide Setup
Auto Wide:
4:3 Mode:
On
Wide Zoom
Set ENTER Exit MENU Select
Normal
Wide Zoom
8
Select the 4:3 Mode with M/m.
Normal: Pictures with a 4:3 aspect ratio are
displayed as-is.
Wide Zoom: Pictures with a 4:3 aspect ratio are
displayed after being enlarged to an aspect
ratio of 16:9.
9
Press ENTER.
The menu returns to the Wide Setup menu.
Note
While inputting DVI or RGB signals, you cannot set
the Auto Wide because the Auto Wide function does
not work.
Picture Enlargement
Setting the Aspect
Pictures can also be enlarged to the desired wide
mode regardless of the type of picture.
1
In the SCREEN CONTROL menu, press M/m to
move the cursor (yellow) to “Aspect” and press
ENTER.
The following menu appears on the screen.
SCREEN CONTROL
Multi Display Setup
Wide Setup
Aspect:
Adjust Screen
Wide Zoom
Set ENTER Exit MENU Select
Wide Zoom
Zoom
Subtitle
Full
Normal
2
Select the Aspect with M/m.
Wide Zoom: Enlarges 4:3 pictures full-screen to
16:9 pictures.
Zoom: Enlarges the picture all the way to the left
and right edges of the screen. (Black bars may
remain on the top and bottom of the screen,
depending on the type of picture.)
Subtitle: Enlarges the picture all the way to the
left and right edges of the screen and
compresses only the area where captions are
displayed.
Full: Extends the left and right sides of the picture
to cover the entire screen without changing the
top and bottom.
Normal: Displays the picture without enlarging it.
3
Press ENTER.
The menu returns to the SCREEN CONTROL
menu.
Notes
• You cannot set the Aspect while using the PICTURE
AND PICTURE function or the Multi Display.
• If you set Aspect, the Auto Wide function is
disabled. If you want to use the Auto Wide function,
reset it to “On.”
• The top or bottom of the picture may be cut off or
the captions may not completely be displayed on the
screen depending on the type and size of picture.
• Please note that showing enlarged/compressed
pictures for commercial purposes or public viewing
at hotels or coffee shops can be copyright
infringement as defined under the copyright laws.