Sony PCG-R505GL - Manual (Page 112)

VAIO Computer Quick Start
112
Using the UNDOCK switch
1 Slide the UNDOCK switch forward. The Undock Complete pop-up
window appears.
2 Wait for the docking indicator to switch off before undocking the computer.
3 Follow steps 3 and 4 of “To disconnect the docking station when the
computer is off.”
Frequently asked questions
How do I set the i.LINK® network switch?
1 Disconnect your computer from the docking station.
2 Disconnect the AC adapter and all cables from your docking station.
3 Set the i.LINK®
*
network switch on the bottom of the docking station to the
unmarked side with a thin pen tip.
UNDOCK switch
* i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394
connection. The i.LINK connection may vary, depending on the software applications,
operating system, and compatible i.LINK devices. All products with an i.LINK connection
may not communicate with each other. Refer to the documentation that came with your
compatible i.LINK device for information on operating conditions and proper connection.
Before connecting compatible i.LINK PC peripherals to your system, such as CD-RW or
hard disk drive, confirm their operating system compatibility and required operating
conditions.
UNDOCK
Switch