Sony KDF-E60A20 - Manual (Page 34)

Connecting the TV
32
KDF-E55/60A20
2-593-962-11(3)
VCR and Cable Use this hookup if:
❑ You have cable TV that does not require a cable box.
Disconnect all power sources before making any connections.
1
Connect the CATV cable to the single (input) jack of the splitter.
2
Use a coaxial cable to connect one of the output jack of the splitter to the
TV’s CABLE jack.
3
Use a coaxial cable to connect the splitter’s other output jack to the
VCR’s input jack.
4
Use A/V and S VIDEO cables to connect the VCR’s AUDIO and
S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.
VHF/UHF CABLE
VIDEO IN
S VIDEO
VIDEO
AUDIO
L (MONO)
R
1 3
Coaxial cable Rear of TV
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
Cable
VCR
A/V cable
(not supplied)
S VIDEO
S VIDEO cable (not supplied)
Coaxial cable
Splitter
✍
If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.