Controlling the av receiver (amplifier) – Sony DVP-S560D User Manual
Page 60
60
Settings and Adjustments
Controlling the TV
When you set the TV/DVD switch to TV, you can control
your TV using the buttons below.
By pressing
?
/1
TV/VIDEO
VOL
Number buttons
and ENTER
Note
Depending on the TV, you may not be able to control your TV or
to use some of the buttons above.
Controlling the AV receiver (amplifier)
1
Slide the TV/DVD switch to DVD.
2
Hold down ?/1, and enter your AV receiver’s
manufacturer’s code (see the table) using the
number button. Then release ?/1.
Code numbers of controllable AV receivers
(amplifier)
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
AV receiver (amplifier).
Controlling Your TV or AV Receiver (Amplifier) with the Supplied Remote
You can
Turn the TV on or off
Switch the TV’s input source between
the TV and other input sources
Adjust the volume of the TV
Select the channel of the TV
?
/1
VOL
TV/VIDEO
TV/DVD
switch
Number
buttons/
ENTER
AV receiver (amplifier)
Manufacturer
Code number
Sony
91 (default), 89
Denon
84, 85, 86
Kenwood
92, 93
Onkyo
81, 82, 83
Pioneer
99
Sansui
87
Technics
97, 98
Yamaha
94, 95, 96
VOL
Controlling the AV receivers (amplifiers)
When you set the TV/DVD switch to DVD, you can
change the volume of the AV receiver (amplifier) using
VOL.
Notes
• Depending on the AV receiver (amplifier), you may not be able
to control your AV receiver (amplifier).
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
Number
buttons
TV/DVD switch
?
/1
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
TV/DVD switch