Sony DVP-S560D User Manual

Page 62

Advertising
background image

62

Additional Information

Troubleshooting

Sound

There is no sound.

, Check that the player is connected securely.
, The audio connecting cord is damaged. Replace it

with a new one.

, Make sure you connect the player to the audio

input connectors on the receiver (amplifier). (page
10)

, Make sure you turn on the TV and the receiver

(amplifier).

, Make sure you select the appropriate input on the

receiver (amplifier) so that you can listen to the
sound from the player.

, The player is in pause mode or in Slow-motion

Play mode. Press H to return to normal play
mode.

, The player is in fast forward or fast reverse mode.

Press H to return to normal play mode.

, Check the speaker connections and setting (page

12, 56). Refer to the operating manual of your
receiver (amplifier).

, If you use the DIGITAL OUT connectors, set

“DIGITAL OUT” to ”ON” in the setup display.
Otherwise no sound will come from the DIGITAL
OUT connectors. (page 55)

, When you play DTS sound tracks, sound will only

come out from the DIGITAL OUT OPTICAL or
COAXIAL connector. (page 17)

Sound is noisy.

, Clean the disc.
, When you play a CD with DTS sound tracks, noise

will come from any connector other than the
DIGITAL OUT OPTICAL or COAXIAL connector.
(page 17)

Sound distortion occurs.

, In the setup display, set “AUDIO ATT” in ”AUDIO

SETUP” to “ON.” (page 54)

The sound loses its stereo effect when you play a
VIDEO CD or a CD.

, Set “AUDIO” to “STEREO” in the Control Menu

display. (page 30)

, Make sure you connect the player correctly. (pages

8, 10, 12)

The surround effect is difficult to hear when you
are playing a Dolby Digital sound track.

, Check the speaker connections and setting (pages

12, 56). Refer to the operating manual of your
receiver (amplifier).

, Depending on the DVD, the output signal may not

be the entire 5.1 channels. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital or DTS format.

The sound comes from the center speaker only.

, Depending on the disc, the sound may come from

the center speaker only.

, Set “VIRTUAL 3D SURROUND” to “OFF” in the

Control Menu display. (page 34)

Operation

The remote does not function.

, Remove any obstacles between the remote and the

player.

, Use the remote near the player.
, Point the remote at the remote sensor on the

player.

, Replace all of the batteries in the remote with new

ones if they are weak.

The disc does not play.

, There is no disc inside (“Insert disc.” appears on

the TV screen).
Insert a disc.

, Insert the disc correctly with the playback side

facing down on the disc tray.

, Clean the disc.
, The player cannot play CD-ROMs, etc. (page 5)

Insert a DVD, a VIDEO CD, or CD.

, Check the region code of the DVD. (page 4)
, Moisture has condensed inside the player. Remove

the disc and leave the player turned on for about
half an hour. (page 6)

Advertising
This manual is related to the following products: