Sony HDR-CX290 - Manual (Page 35)


GB
Sa
ving images on an e
xter
nal media devic
e
Saving images on
an external media
device with high
definition (HD) image
quality
(Models with an
AC Adaptor)
For information on your camcorder model,
see the following page:
Functions and equipment  p.12
Supplied items  p.13
You can save movies and photos on an
external media device (USB storage
devices), such as an external hard disk
drive. The following functions will be
available after you have saved your images
on an external media device.
You can connect your camcorder and the
external media device, and then play back
images stored on the external media device.
You can connect your computer and the
external media device and import images to
your computer using the “PlayMemories Home”
software (p. 33).
Notes
For this operation, you need the USB Adaptor
Cable VMC-UAM2 (sold separately).
Connect the AC Adaptor and the power
cord (mains lead) to the DC IN jack of your
camcorder and the wall outlet (wall socket).
Refer to the instruction manual supplied with
the external media device.





1
Connect your camcorder and
the external media device using
the USB Adaptor Cable (sold
separately).
2
Select [Copy.] on the camcorder
screen.
Movies and photos that are stored on the
recording media, and that have not yet
been saved on to external media device
can be saved on the connected media
device at this time.
This operation is available only when
there are newly recorded images in your
camcorder.
To disconnect the external media device,
select while the camcorder is in the
playback standby mode (either Event View
or Event Index is displayed).



USB Adaptor Cable
VMC-UAM2
(sold separately)