Sony NV-U83T - Manual (Page 10)

Turning On the nav-u Unit
9
US 1. Ensure that you are in an open area and that the nav-u device has a
clear view of the sky.
2. Press on/standby button
3. Follow the on-screen instructions of the Startup Configuration Wizard
before first use
4. Wait while the nav-u device calculates current location using GPS
satellite signals.
Note: This could take as long as 10 minutes during the first use of your nav-u.
Current position icon will turn
red to indicate sufficient GPS
signal strength
Note: Before first GPS Signal is found, default map position is home address entered in #2,
or Washington, DC if no home address has been entered.
RED:
Locked on GPS signal; position fixed
GREY:
Inadequate GPS signal; position not fixed
ORANGE:
GPS signal lost; using POSITION Plus
to estimate position