Lighting, Placement of an external display, Notes on setup – Sony PCG-SR17 User Manual

Page 15: Setting up your notebook

Advertising
background image

Ergonomic Considerations

17

fatigue by adjusting the tilt of the display to the proper position. You can
adjust the brightness setting of the display also.

Lighting — Choose a location where windows and lights do not create glare
or reflection on the display. Use indirect lighting to avoid bright spots on the
display. You can also purchase accessories for your display that help reduce
glare. Proper lighting adds to your comfort and work effectiveness.

Placement of an external display — When using an external display, set
the display at a comfortable viewing distance. Make sure the display screen
is at eye level or slightly lower when you are sitting in front of the monitor.

Notes on Setup

Setting Up Your Notebook

Do not place your computer in a location subject to:

Heat sources, such as radiators or air ducts

Direct sunlight

Excessive dust

Moisture or rain

Mechanical vibration or shock

Strong magnets or speakers that are not magnetically shielded

Ambient temperature of more than 95º F (35º C) or less than
40º F (5º C)

High humidity

Do not place electronic equipment near your computer. The computer’s
electromagnetic field may cause a malfunction.

Provide adequate air circulation to prevent internal heat build-up. Do not
place your computer on porous surfaces such as rugs or blankets, or near
materials such as curtains or draperies that may block its ventilation slots.
Leave a space of at least 8 inches behind the back panel of the computer.

The computer uses high-frequency radio signals and may cause interference
to radio or TV reception. Should this occur, relocate the computer a suitable
distance away from the set.

Use only specified peripheral equipment and interface cables; otherwise,
problems may result.

Advertising
This manual is related to the following products: