Setting up your ethernet connection, To connect to the network (windows me), To connect to the network (windows 2000) – Sony PCG-SR17 User Manual
Page 71: To set network components (windows me), To set network components (windows 2000)
Connecting to the Local Area Network (LAN)
73
Setting Up Your Ethernet Connection
To connect to the network (Windows Me):
1
Right-click My Network Places and select Properties.
2
Click the Identification tab and type in the computer name, workgroup, and
computer description.
To connect to the network (Windows 2000):
1
Right-click My Network Places and select Properties. The Network and
Dial-up Connections dialog box displays.
2
Click Make a New Connection. The Network Connection Wizard displays.
Follow the online instructions to connect to the network.
To set network components (Windows Me):
1
Right-click My Network Places and select Properties.
2
Click the Configuration tab. This will give you access to a listing of installed
network components. If you do not see the component you desire, click Add
and follow the on-screen installation instructions.
To set network components (Windows 2000):
1
Right-click My Network Places and select Properties. The Network and
Dial-up Connections dialog box displays.
2
Click the Add New Components hyperlink. This will give you access to add
or remove network components. Follow the on-screen installation
instructions.