Adding memory, Installing a memory module – Sony PCG-SR17 User Manual

Page 78

Advertising
background image

VAIO® Notebook User Guide

80

Adding Memory

By adding memory to your notebook, you can increase the speed of data
processing, especially when several software applications are open at the same
time.

The components inside the notebook are extremely delicate. To avoid
damage to the notebook, proceed carefully when removing or installing
memory modules.

You can add up to 256 MB of memory on the PCG-SR17/PCG-SR17K by
installing optional memory modules. To upgrade memory, use only a PC-100
SDRAM microDIMM with gold lead contacts.

Memory modules and other Sony notebook supplies, accessories, and
peripherals can be purchased from an authorized Sony dealer, or by
contacting Sony at http://vaio.sonystyle.com/.

Installing a Memory Module

The notebook is equipped with two memory slots. You can expand the memory
in both slots up to a maximum of 256 MB.

The PCG-SR17/PCG-SR17K has 64 MB of memory preinstalled in each of the
slots for a total of 128 MB. You can remove those modules and replace them with
128 MB in each slot for a total of 256MB.

Sony recommends memory upgrades be performed by an authorized Sony

Service Center or Sony authorized agent. To find the nearest center or agent,

see http://www.sony.com/pcsupport.

The following procedures assume familiarity with the general terminology

associated with personal notebooks and with the safety practices and

regulatory compliance required for using and modifying electronic equipment.

Warning: Be careful when adding memory. Mistakes when installing or

removing a memory module may cause a malfunction.
Observe proper safety precautions when installing modules in your notebook.

Advertising
This manual is related to the following products: