Sony BDP-S560 - Manual (Page 15)

1
Select the security method.
Internet Settings - Security Settings
WPA-PSK (AES)
WEP
WPA2-PSK (AES)
WPA-PSK (TKIP)
None

Select the method for setting IP address.
Internet Settings - IP Address Setting Method
Manual
Auto Acquisition

List of settings
Settings are complete.
Connection Method
Wireless LAN Setting Method
SSID
Security Setting
IP Address
Subnet Mask
Wireless
Access point scan
AP_for_BDP
None
192.168.011.002
255.255.255.000
IP Address Settings Auto Acquisition
Internet Settings - Complete Settings
Finish

Check that “None” is selected, and press
ENTER. Select the following items on the
respective screens.
“IP Address Setting Method” screen:
Select “Auto Acquisition” (unless you use a static
IP address), and press ENTER.
“DNS Setting Method” screen:
Select “Auto” (unless you specify a DNS server),
and press ENTER.
“Proxy Server” screen:
Select “Do not use” (unless your Internet service
provider has a specific proxy server setting), and
press ENTER.
“Network Connection Diagnostics” screen:
Select “Perform,” and press ENTER.
If an error message appears, follow the on-
screen instructions.
For further details, visit the following
website and check the FAQ contents:
http://www.sony.com/blurayupdate
Press ENTER when “Settings are
complete.” appears.
Wi-Fi Setup is finished.
 Tip
If an error message appears in the network
diagnostic results, check the message and set
the network settings again.