AMX MODERO VIEWPOINT WIDESCREEN TOUCH PANEL MVP-5200I User Manual
Mvp-5200i
Advertising
Table of contents
Document Outline
- MVP-5200iModero® ViewpointWidescreen Touch Panel
- Introduction
- Accessories
- Configuring Communication
- IR Communication
- Modero Setup and System Settings
- Wireless Settings - Wireless Access Overview
- Configuring Wireless Network Access
- Step 1: Configure the Device’s Wireless IP Settings
- Step 2: Configure the Card’s Wireless Security Settings
- Step 3: Choose a Master Connection Mode
- Ethernet over USB
- Using G4 Web Control to Interact with a G4 Panel
- Using the NetLinx Master to control the G4 panel
- Setup Pages
- Protected Setup Pages
- Upgrading Firmware
- Programming
- Battery Life and Replacement
- Appendix A: Text Formatting
- Appendix B: Wireless Technology
- Appendix C: Troubleshooting
- Panel Doesn’t Respond To Touches
- Battery Will Not Hold Or Take A Charge
- MVP-5200i Isn’t Appearing In The Online Tree Tab
- MVP Can’t Obtain a DHCP Address
- My WEP Doesn’t Seem To Be Working
- NetLinx Studio Only Detects One Of My Connected Masters
- Can’t Connect To a NetLinx Master
- Only One Modero Panel In My System Shows Up
- Panel Behaves Strangely After Downloading A Panel File Or Firmware