Sony VGC-RB64GY - Manual (Page 122)

About Using a Monitor (Display)
 DVD playback and certain video-related software may not function correctly when your monitor is set to a high
refresh rate. If your monitor does not play back video content properly, try setting the display to a lower refresh
rate.
 Do not place the display near a strong magnetic force.
 Do not block the ventilation slots on the display.
 Using the computer in low temperature conditions may produce a residual image on the screen. This is not a
malfunction. When the computer returns to normal temperature, the screen returns to normal.
 A residual image may appear on the screen if the same image is displayed for a lengthy period of time. The image
disappears after a period of time. You can use a screen saver to prevent residual images.
 The screen becomes warm during operation. This is normal and does not indicate a malfunction.
About handling an LCD monitor (display)
 Do not place the display near a strong magnetic force.
 Do not block the ventilation slots on the display.
 Using the computer in low temperature conditions may produce a residual image on the screen. This is not a
malfunction. When the computer returns to normal temperature, the screen returns to normal.
 A residual image may appear on the screen if the same image is displayed for a lengthy period of time. The image
disappears after a period of time. You can use a screen saver to prevent residual images.
 The screen becomes warm during operation. This is normal and does not indicate a malfunction.
 Do not leave the LCD in direct sunlight, as this may damage the screen. Use caution when using the computer near
a window.
 Do not exert pressure on the LCD or scratch the surface, as this may cause the screen to malfunction.
 The LCD screen is manufactured using high-precision technology. On occasion, you may see tiny black or colored
points on the LCD. This is normal and does not indicate a malfunction.
 Avoid rubbing the screen, as this can damage the LCD. Use a soft, dry cloth to clean the display.
Monitor setup
You can verify your monitor's settings before video playback.
 Color quality: Use factory default settings (32-bit).
 Screen resolution: Set to 1024 x 768 pixels. Using other display settings may cause an improper screen image or a
poor TV/video recording.
Some displays may require the screen resolution to be set to 1280 x 1024 pixels. For information on your display's
setting requirement, see the instructions supplied with your display.
 Check your display setup in the Microsoft ® Windows ® operating system before starting up video playback or
recording software. For more information, refer to the monitor's operating manual.
 Do not change the display setup while recording TV or video. Your computer may operate improperly and provide a
poor TV/video recording.
Page 122