Sony PEG-SJ22 - Manual (Page 80)

Customizing your Sony CLIÉ™ handheld (Preferences) 80
Sony Personal Entertainment Organizer A-BGK-100-11 (1)
Changing the Network preferences
Creating Log-in Scripts
A log-in script is a series of commands that automates logging in to a network
server, such as your corporate network or your Internet Service Provider (ISP).
You can also use non-ASCII characters or literal characters for log-in scripts.
b For details, refer to “Non-ASCII Characters for Log-in Scripts” on page 82.
Note
Depending on the type of communication adapter (sold separately), there may be cases
when there is no need to create a log-in script.
b For details on accessories that are not supplied, refer to “Read This First (Operating
Instructions).”
1
On the Network Preferences screen, tap Details.
The Details screen is displayed.
2
Tap Script.
The Log in Script screen is displayed.
3
Tap the arrow V next to End and select one of the following
commands.
When the command requires additional information, a field appears to the
right of it for you to enter the information.
Wait For Tells your CLIÉ handheld to wait for specific characters
from the TCP/IP server before executing the next
command.
Wait For Prompt Detects a challenge-response prompt coming from the
server and displays the dynamically generated challenge
value. It then enters the challenge value into your token
card, which in turn generates a response value for you to
enter on your CLIÉ handheld. This command takes two
arguments, separated by a vertical bar (|) on the input
line.
Send Transmits specific characters to the TCP/IP server to
which you are connecting.
Send CR Transmits a carriage return or LF character to the TCP/
IP server to which you are connecting.
Send User ID Transmits the User ID information entered in the User
ID field of the
Network Preferences screen.
Continued on next page
• • • • • • • • • • • • • • •