Sony UDA-1 - Manual (Page 59)

USB DAC AMPLIFIER
UDA-1
Using the DSEE function
When the DSEE (Digital Sound Enhancement Engine) function is activated, the USB DAC AMPLIFIER
restores high-frequency sound and almost imperceptible fine fade-out sound, which are usually lost due
to compression. This gives a natural and expansive sound to compressed audio files.
Note
The DSEE function works only for PCM format sound input via the digital connector.
The DSEE function does not work for DSDIFF, DSF format files.
The DSEE function does not work for sound input from devices that are connected to the LINE IN jacks
of the USB DAC AMPLIFIER.
Hint
DSEE stands for Digital Sound Enhancement Engine, a high range compensation technology developed
independently by Sony.
1. Press the DSEE button on the remote control.
During playback using the DSEE function, the DSEE lamp is lit.
To cancel the DSEE function, press the DSEE button again.
Note
When you select an input source or input signal that is not supported, the DSEE function setting cannot
be changed. If you press the DSEE button when the DSEE function setting cannot be changed, the
DSEE lamp flashes three times.
Notes on use
4-469-134-11(2)
Copyright 2013 Sony Corporation
Help Guide
How to Use
59