Sony XNV-770BT - Manual (Page 18)

18
Navigation
Using the navigation function
1
Connect the navigation module to the
car dock.
For details, see the supplied installation/
connection manual.
2
Press (TOP), then touch in the top
menu.
The display to select the view mode appears.
The view mode options are as follows.
“Navigation Only”: Shows the navigation
display only.
“Dual Screen Navi + A/V (Large)”:
Shows the current audio/video source on the
navigation display.
“Dual Screen Navi + A/V (Small)”:
Shows the key of the current audio/video
source on the navigation display.
3
Touch the desired view mode.
When selecting “Navigation only”
The navigation display appears, and you can
then use the navigation function.
When selecting “Dual Screen Navi + A/
V (Large)” or “Dual Screen Navi + A/V
(Small)”
The display to select the position of the audio/
video source and keys appears.
1 Touch the desired position.
2 Touch the display in the navigation area.
The audio/video source and keys
disappear, and you can then use the
navigation function.
For further details on navigation operation,
refer to the leaflet (supplied by TomTom) for
the navigation module.
Notes
• During navigation operation, operation sound is not
output even if “Beep” is set to “ON.”
• The navigation operation cannot be performed by
the remote commander.
• The voice guidance is output only from the front
speakers, and the volume of the voice guidance is
independent of the regular volume.
To switch to the current audio/video
source
Press and hold (TOP).
To switch back to the navigation mode, press and
hold (TOP).
When “Dual Screen Navi + A/V (Large)” or
“Dual Screen Navi + A/V (Small)” is selected
as a view mode
You can also switch to the current audio/video
source by the following method.
For “Dual Screen Navi + A/V (Large),” touch the
audio/video source area.
For “Dual Screen Navi + A/V (Small),” touch
.
To switch back to the navigation mode, touch
“Navi” in the reception/playback display.
To disconnect the navigation module
Press the button on the car dock to release the
navigation module, then remove.
Note
Only connect and disconnect the navigation module
while the car’s ignition is off and its power indicator is
turned off.
Navigation
Only
Dual Screen
Navi + A/V Navi + A/V
(Large)
Dual Screen
(Small)
ATT Top
Lower Left
Upper Left
Lower Right
Upper Right
Select screen position. Back
1
2