Making the player move to music, Jumping 5 tracks/groups ahead (or back), Restrictions on motion playback – Sony SEP-30BTWHI User Manual

Page 17: Places to perform motion playback

Advertising
background image

SEP-30BT  3-870-834-11(1)



SEP-30BT  3-870-834-11(1)



Jumping 5 tracks/groups ahead (or back)

Hold the player in your hand to jump tracks/groups.

1

While music is playing, double-click the Play button.

The side lamps light up in orange.

2

While the side lamps are lit in orange, turn the upper wheel.

If you turn the wheel to the right (left) about 45

°

, you can jump 5 tracks ahead (back).

If you turn the wheel to the right (left) about 90

°

, you can jump 5 groups ahead (back).

Hint

You can set the start-up sound, operation sound, and verbal guide for the group number so they

do not sound using Rolly Choreographer (page 37).

Notes

If you leave the player with the Power switch set to ON for about 30 seconds, the player enters

the power-saving mode automatically to save battery power. You can set the player to power-

saving mode by holding the Play button down for about 2 seconds. To release power-saving

mode, click the Play button.

If you play music near the range of maximum volume level, the speakers vibrate, and the case of

the player vibrates, too. If the arms close (in the course of a motion procedure, or are closed by

hand), the sound may be muffled or distorted.

You can play motion transferred from Rolly Choreographer in time to music.

When the music has no motion assigned, the player analyzes the music, then creates and

assigns motion appropriate to the music (“self-motion” function).

“Motion playback” is available only when the player is placed on a level surface.

Restrictions on motion playback

Motion playback of the player was designed taking safety into consideration. Motion

playback has the following restrictions to prevent the player from falling off a table or desk,

or colliding against other objects, or to avoid accidents when you take your eyes away from

the player.

Motion stops when a track is over.

You cannot operate the player other than stopping during motion playback.

A motion can play no longer than 7 minutes per track. This is the same for either motions

created by Rolly Choreographer or “self-motions.” When the track is longer than 7 minutes, the

player plays music and motion for the first 7 minutes, and music only for the rest of the track.

Places to perform motion playback

Perform motion playback on a spacious level surface without obstacles around.

Avoid the following places or surfaces when performing motion playback.

Where there is a risk that the player may drop

Uneven places, or unstable places subject to vibrations

Slippery places, or on thick carpet

Soft surfaces, such as bedding

Places subject to soil, sand, or dust

Wet places with water or oil present

Outdoors










Enjo

ying Music and M

otion

Playing Music

(continued)

continued

Making the Player Move to Music

Advertising
This manual is related to the following products: