Touch panel adjust – Sony XAV-602BT User Manual

Page 26

Advertising
background image

26

GB

Auto OFF

Shuts off automatically after a desired time when
no source is selected.
Unit status: Any status

Demo

Unit status: Any status

Beep

Unit status: Any status

Front Panel Caution Alarm
(XAV-602BT only)

Unit status: Any status

Rotary Commander

Changes the operative direction of rotary
commander controls.
Unit status: Any status

Key Illumination

Unit status: Any status

Touch Panel Adjust

Unit status: Any status

Camera Input

Unit status: Any status

Rear View Camera Setting

Displays setting items on the picture from the rear
view camera to assist driving.
This setting is available only when:
 [Camera Input] is set to [Normal] or [Reverse].

 the parking brake is applied.
Unit status: Any status

Output Color System

Unit status: No source selected

Bluetooth Connection

Unit status: Any status

Option

Purpose

OFF (

), 30 sec,

30 min, 60 min

To select the desired time to shut
off the unit or deactivate the
Auto OFF function.

Option

Purpose

ON (

), OFF

To activate the demonstration.

Option

Purpose

ON (

), OFF

To activate the operation sound.

Option

Purpose

ON (

), OFF

To activate the caution alarm.

Option

Purpose

Default (

)

To use in the factory-set
position.

Reverse

To use on the right side of the
steering column.

Option

Purpose

Rainbow (

)

(12 preset
colors,
customized
color and 5
preset patterns)

To change the color of the
buttons on the unit to match the
car’s interior.

Option

Purpose

To adjust the touch panel
calibration if the touching
position does not correspond
with the proper item.

Option

Purpose

OFF

To deactivate the input.

Normal (

)

To display the picture from the
rear view camera.

Reverse

To flip the picture from the rear
view camera horizontally.

Option

Purpose

To display the marker lines.
Touch again to hide the marker
lines.

To adjust the length and/or
position of the marker lines.

Option

Purpose

NTSC (

), PAL

To change the color system
according to the connected
monitor. (SECAM is not
supported.)

Option

Purpose

ON, OFF (

)

To activate the BLUETOOTH
signal.

Advertising
This manual is related to the following products: