Sony PCG-505F - Manual (Page 49)

Connecting Peripheral Devices !%
3
Fold the port replicator cable into the compartment on the side of the
port replicator.
Connecting a Printer
You can use the port replicator to connect a Windows 98-compatible
printer or other parallel port device to your computer.
To connect a printer
❑
Use the symbol to locate the Printer connector on the port
replicator. Plug the printer cable (supplied with the printer) into this
connector.
✍
If you do not turn off the computer before removing the port replicator, you must turn off
the computer before reattaching the port replicator.
✍
See the manual that came with your printer for more information on installation and use.
Before using the printer, you may need to change the Printer setting in the Sony Notebook
Setup software. See “Displaying the Sony Notebook Setup Screen” on page 63.
Printer
Power cord
Printer cable
(supplied with the printer)
to
Printer
to your computer