Sony KDL-32BX300 - Manual (Page 7)

7
G
e
tting
Started
Locating Inputs and Outputs
Item Description
1 DIGITAL AUDIO
OUT (OPTICAL) Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
Digital compatible.
2 CABLE/
ANTENNA RF input that connects to your Cable or VHF/UHF antenna.
3 COMPONENT
IN 2
(1080p/1080i/
720p/480p/480i)/
R-AUDIO-L Component video provides better picture quality than the composite video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
4 VIDEO IN/
COMPONENT
IN 1
(1080p/1080i/
720p/480p/480i)/
R-AUDIO-L
(MONO) This input port can be used as a composite video input (VIDEO) or as a component
video input (COMPONENT 1). For composite use, connect the yellow jack to Y for
video and use audio L (mono) and R for audio signal. For component connection,
use Y, P
B
, P
R
for video signals and also connect the audio L (mono) and R for audio
signal.
This TV can auto detect and switch between the VIDEO and COMPONENT 1
when VIDEO or COMPONENT 1 is connected.
To set to auto detection, press MENU, then select the Setup settings. Select the
Video/Component 1 Selection option then set to Auto.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
AUDIO
1
2
IN
AUDIO
OUT
(FIX)
AUDIO
SERVICE
ONLY
R L
AUDIO RGB
PC IN PC/HDMI 1
AUDIO IN
2
1
AUDIO
R L
R L
COMPONENT IN
P R P B Y
VIDEO IN
(MONO)
(1080p/1080i/
720p/480p/480i)
CABLE/
ANTENNA
DIGITAL
AUDIO OUT
(OPTICAL)
1 2 3 4 5
8 7 6
Rear Panel
(Continued)