Sony PEG-NX80V - Manual (Page 4)

The OnSpot Concept
Decuma OnSpot Technology offers a new concept for handwritten input, mimicking the way in
which writing is done with pen and paper. One single input area is used both for writing and
presenting recognized letters and for editing and correcting the text. The displayed letters guide
you to the optimal way of writing (where and how) enabling you to get the highest hit rate out of
Decuma Latin.
How to write with Decuma Latin 3.0
Write word-by-word as you normally would, using the baseline of the input area. When you
reach the end of the baseline, you can send the written text to the application in two ways
1) Place the Stylus before the arrow at the start of the baseline and continue by overwriting
the existing text. This sends the existing text and a succeeding character space to the
application.
2) Tap the arrow at the end of the baseline this sends the existing text to the application, but
without a succeeding character space.
If the text exceeds the width of the input area, insert a hyphen to indicate that the last word is
incomplete. Then place the Stylus before the arrow at the start of the baseline and continue.
4