Sony NSZ-GT1 - Manual

HDMI Cable
* Not supplied
Router
TV
Internet TV Box
Connection
In the Box
Internet TV Box (1)
Keypad (1)
Size AA batteries (2)
HDMI cable (1)
IR Blaster cable (1)
AC power cord (1)
AC adapter (1)
Quick Setup Guide (1)
Reference Guide (1)
Warranty card (1)
End User License
Agreement (1)
Inserting batteries
AA-size (R6)
Preparation
Connect to a network
When using wired connection, connect the unit and a router with a LAN cable. When
using wireless connection, you need to set the Network Setup in the Initial Setup
Wizard (on step 7).

For details on making a network connection with the Cable/Satellite Box,
see the operating instructions supplied with the Cable/Satellite Box.
Connect the Internet TV Box
Connect the unit between the TV and Cable/Satellite Box using
the HDMI cable.
To use an AV Receiver
Connect the unit to an AV Receiver instead of the TV using the
HDMI cable.
step Connect to the power source
Connect the AC adapter and AC power cord to the unit and wall outlet.
Change the TV input
Switch the input selector on the TV so that the signal from the unit
appears the your TV screen.
step
step step
step
Press the (on/standby) button
step Start Internet TV Box setup
Follow the directions of the Initial Setup Wizard displayed on the screen.

When you skip the Network Setup, only limited functions will be
available with the unit.

The screen may stay dark for several seconds after the Sony logo
disappears. Wait for a while until the Initial Setup Wizard is displayed.

It takes about 15 minutes to complete the Initial Setup.
* This illustration may differ from the actual display.
Quick Setup Guide
Internet TV
NSZ-GT1
Printed in China
© 2010 Sony Corporation
4-196-879-14 (1)
Connect the IR Blaster
Connect the IR Blaster to control the Cable/Satellite Box.
Place the IR Blaster near the remote sensor of the Cable/Satellite Box.
To use an AV Receiver
You can control an AV Receiver by connecting the IR Blaster to it.
step
*HDMI Cable
Cable/Satellite Box
TV
Internet TV Box
Cable/Satellite Box
IR Blaster cable
Place the IR Blaster so that the infrared
transmitter points to the remote sensor of
the Cable/Satellite Box. For details on the
IR Blaster, see “Help Guide” on the back
side.

You can control a Cable/Satellite Box via the Home Network depending on your Cable/Satellite TV
provider. For details, see “Help Guide” on the back side.
Router
TV
Internet TV Box
Cable/Satellite Box Router
*LAN cable or Wireless LAN
PLEASE READ END USER LICENSE
AGREEMENT BEFORE USING
THIS PRODUCT
* Not supplied
Note If your connection method differs from that shown above, see “Help Guide” (http://esupport.sony.com/internettv/helpguide/). For details on “Help Guide,” see the back side.