Connecting the antenna (aerial), Step 3: preparing for network connection, Connecting the antenna – Sony BDV-E2100 User Manual

Page 21: Aerial), Step 3: preparing for network, Connection

Advertising
background image

21

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100
(PMRF 06)\4446733121_US (U2)\040GET.fm

masterpage: Right

G

e

tt

ing

Started

• Be sure to fully extend the FM wire antenna

(aerial).

• After connecting the FM wire antenna (aerial),

keep it as horizontal as possible.

Step 3: Preparing for
Network Connection

To connect the system to your network, perform
[Easy Network Settings]. For details, see “Step 4:
Performing the Easy Setup” (page 23).

Select the method based on your LAN
(Local Area Network) environment.
• If you use a wireless LAN

The system has built-in Wi-Fi, and you
can connect the system to the network by
making the network settings.

• If you use other than a wireless LAN

Use a LAN cable to connect to the LAN
(100) terminal on the unit.

A shielded interface cable (LAN cable), straight
or crossover, is recommended.

Connecting the antenna
(aerial)

Note

FM wire antenna (aerial)
(supplied)

Tip

Tip

Broadband router

LAN cable (not supplied)

Advertising
This manual is related to the following products: