Notes about discs, Troubleshooting, Notes about discs troubleshooting – Sony BDV-E2100 User Manual

Page 55

Advertising
background image

55

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100
(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

A

d

d

ition

al In

form

atio

n

Notes about Discs

On handling discs

• To keep the disc clean, handle the disc by

its edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

• Do not expose the disc to direct sunlight

or heat sources such as hot air ducts, or
leave it in a car parked in direct sunlight
as the temperature may rise considerably
inside the car.

• After playing, store the disc in its case.

On cleaning

• Before playing, clean the disc with a

cleaning cloth.
Wipe the disc from the center out.

• Do not use solvents such as benzine,

thinner, commercially available cleaners,
or anti-static spray intended for vinyl
LPs.

This system can only play a standard
circular disc. Using neither standard nor
circular discs (e.g., card, heart, or star
shape) may cause a malfunction.

Do not use a disc that has a commercially
available accessory attached, such as a
label or ring.

Troubleshooting

If you experience any of the following
difficulties while using the system, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.

The power does not turn on.

t Check that the AC power cord (mains

lead) is connected securely.

The remote control does not function.

t The distance between the remote

control and the unit is too far.

t The batteries in the remote control are

weak.

The disc tray does not open and you
cannot remove the disc even after you
press
Z.

t Try the following:

1

Hold down N and Z on the unit
for more than 5 seconds to open the
disc tray.

2

Remove the disc.

3

Disconnect the AC power cord
(mains lead) from the wall outlet
(mains), then reconnect after
several minutes.

The system does not work normally.

t Disconnect the AC power cord (mains

lead) from the wall outlet (mains), then
reconnect after several minutes.

General

Advertising
This manual is related to the following products: