Sony PCG-F630 - Manual (Page 81)

Notebook User Guide 66
My touchpad interprets a single tap as a double-click
Click the Mouse icon in the Control Panel and then change the button
assignments in the Mouse Properties dialog box. One of the buttons is
assigned to the double-click action.
My computer does not shut down
It is best to shut down your computer using the Shut Down command on the
Windows Start menu. Using other methods, including those listed here, may
result in loss of unsaved data. If the Shut Down command does not work
properly, follow these steps:
❑ Restart the computer by pressing Ctrl+Alt+Delete. If this does not work,
press the power button and hold it for at least four seconds to turn off the
power.
❑ Unplug the computer from the AC adapter and remove the battery pack
from your computer.
My PC card is not working
❑
Make sure the PC card is compatible with Windows®.
The sound of my computer’s fan is too loud
Use the PowerPanel utility to change the Thermal Control Strategy setting to
Quiet. This setting slows down the CPU fan speed. See the PowerPanel Help
for more information.
I cannot print
❑
Your connected printer may not function after the computer resumes from
a power-saving mode. When this occurs, follow the procedures below to
reset the printer connection:
1. Right-click the My Computer icon on the desktop, and then select
Properties.
2. Click the Device Manager tab.
3. Select Refresh, and then click OK. The printer should now function properly.
Power Management
The operating system may become unstable if a lower power state such as
hibernation is initiated and then changed before the operating system
completely enters the lower power state. To restore the computer to its normal
operating stability, close all open applications, press the power button, and
hold it for four seconds or more to completely shut down the computer.