Adding memory – Sony PCG-F630 User Manual

Page 92

Advertising
background image

77

Adding Memory

In the future you may want to install memory modules to expand the
functionality of your computer. Your system comes with 64 MB of installed
memory (64 MB x 1). By inserting optional memory modules in your
computer's expansion slot, you can increase the memory up to 256 MB (128
MB x 2). 64 MB and 128 MB expansion memory modules are available as
optional memory modules. For memory upgrades, use only PC-100 SDRAM
SO-DIMM (gold lead contacts). Sony computer supplies, accessories, and
peripherals can be purchased from your Sony-authorized dealer or by
contacting Sony at http://www.sony.com/accessories.

The procedures described below assume familiarity with the general
terminology associated with personal computers and with the safety
practices and regulatory compliance required for using and modifying
electronic equipment.

Disconnect the system from its power source and from any
telecommunications links, networks, or modems before you open the
system or follow any of the procedures described below. Failure to do so
may result in personal injury or equipment damage.

Electrostatic discharge (ESD) can damage memory modules and other
components. Perform the procedures described below only at an ESD
workstation. If such a station is not available, do not work in a carpeted
area, and do not handle materials that produce or hold static electricity

The size of your memory may differ if you purchased a specially configured system.

Make sure you observe the proper safety precautions when you install memory
modules in your computer. See the bulleted list below. Be careful when adding
memory. Mistakes when installing or removing a memory module may cause a
malfunction.

Advertising
This manual is related to the following products: