Sony STR-DH130 User Manual

Page 11

Advertising
background image

11

GB

D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB03DES_STR-DH130-
U2.fm

masterpage: Right

STR-DH130

4-294-472-11(1)

* If you press AV ?/1 (A) and ?/1 (B)

simultaneously, the receiver and connected
equipment will turn off (SYSTEM STANDBY).

The function of the AV ?/1 (A) changes
automatically each time you press the input
buttons (C).

**The number 5, MASTER VOL +/TV VOL +, and

N buttons have tactile dots. Use the tactile dots
as references when operating the receiver.

To control a Sony TV

Hold down TV (O), then press the button
printed in orange to select the function you
want.
Example: Hold down TV (O), then press
TV CH +.

* If you press AV ?/1 (A) and ?/1 (B)

simultaneously, the receiver and connected
equipment will turn off (SYSTEM STANDBY).

The function of the AV ?/1 (A) changes
automatically each time you press the input
buttons (C).

**The number 5, MASTER VOL +/TV VOL +, and

N buttons have tactile dots. Use the tactile dots
as references when operating the receiver.

V SLEEP

Sets the receiver to turn off automatically at a
specified time.
Each time you press this button, the display
changes cyclically as follows.

0-30-00

t 1-00-00 t 1-30-00 t 2-00-00 t

OFF

When Sleep Timer is being used, “SLEEP”
indicator lights up in the display panel.

Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time
appears on the display panel. If you press
SLEEP again, the Sleep Timer will be canceled.

A TV ?/1 (on/standby)

Turns the TV on or off.

H ENTER/MEMORY

Enters the selections.

J TOOLS/OPTIONS

Displays the TV function options.

2
Press
TV CH +

1
Hold
down
TV

K MUTING

Activates the TV’s muting function.

L TV VOL +**/–

Adjusts the TV volume.

M MENU/HOME

Displays the TV menus.

N TV CH +/–

Scans for the preset TV channels.

P RETURN/EXIT O

Returns to the previous TV menu.

R DISPLAY

Displays information related to the current TV
program.

S -/--

Selects TV channel entry mode.

>10/

x

Selects the channel numbers of the Digital
CATV terminal.
For example, to select 2.1, press 2, >10/

x

and 1.

T Numeric buttons**

Selects the TV channels.

W TV INPUT

Selects the input signal.

continued

Advertising