Selecting the speaker system, Adjusting the tone, Selecting the speaker system adjusting the tone – Sony STR-DH130 User Manual

Page 19

Advertising
background image

19

GB

D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130-
U2.fm

masterpage: Right

STR-DH130

4-294-472-11(1)

Pre

p

ar
ing the

R

eceive

r

Selecting the speaker
system

You can select the speakers you want to drive,
if you have connected the speakers to
SPEAKERS

A

and

B

terminals.

Be sure to use the buttons on the receiver to
perform this operation.

Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the speaker
system you want to drive.

To turn off the speaker output

Press SPEAKERS (OFF/A/B/A+B)
repeatedly until the “SP A” and “SP B”
indicators on the display do not light up.

Note

You cannot switch the speaker system by pressing
SPEAKERS (OFF/A/B/A+B) when the headphones
are connected.

Adjusting the tone

You can adjust the tonal quality of the
speakers.

Press TREBLE + or TREBLE –
repeatedly to adjust the treble
level.

Press BASS + or BASS –
repeatedly to adjust the bass level.

You can adjust from –10 dB to +10 dB in 1 dB
step.

The initial setting is 0 dB.

To select

Light up

The speakers connected to the
SPEAKERS A terminals

SP A

The speakers connected to the
SPEAKERS B terminals

SP B

The speakers connected to both the
SPEAKERS A and B terminals
(parallel connection)

SP A
SP B

SPEAKERS (OFF/A/B/A+B)

TREBLE
+/–

BASS
+/–

Advertising