Sony STR-DH130 - Manual (Page 26)

26 GB
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130-
U2.fm masterpage: Left
STR-DH130
4-294-472-11(1)
Receiving RDS
broadcasts
(Europe model only)
This receiver allows you to use Radio Data
System (RDS), which enables radio stations to
send additional information along with the
regular programming signal. This receiver
offers convenient RDS features, such as
Program Service name display. RDS is
available only for FM stations.*
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
Simply select a station on the FM
band using Direct Tuning (page 23),
Automatic Tuning (page 23), or
Tuning with Preset Station
(page 25).
When you tune to a station that provides RDS
services, “RDS” lights up and the Program
Service name appears on the display panel.
Note
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal or if the signal
strength is weak.
Tip
While a Program Service name is displayed, you can
check the frequency by pressing DISPLAY
repeatedly (page 21).
Using the setting menu
You can customize the receiver by making
various adjustments with setting menu.
1
Press AMP MENU.
2
Press V/v repeatedly to select
the menu item you want, then
press
or b.
3
Press V/v repeatedly to select
the setting you want, then
press .
To return to the previous
display
Press B or RETURN/EXIT O.
To exit the menu
Press AMP MENU.
Note
Some parameters and settings may appear dimmed
on the display panel. This means that they are either
unavailable or fixed and unchangeable.
Menu Operations
AMP
MENU
RETURN/
EXIT O
,
V/v/B/b