The supplied remote, Changing the password, Controlling tvs with the remote – Sony DVP-NS775V User Manual

Page 73

Advertising
background image

73

Us
in

g Vari

ous

Addi

tion
al

Fu
nc
tions

Changing the password

1

Press DISPLAY while the player is in
stop mode.

The Control Menu appears.

2

Press X/x to select

(PARENTAL CONTROL), then press
ENTER.

The options for “PARENTAL
CONTROL” appear.

3

Press X/x to select “PASSWORD
t,” then press ENTER.

The display for entering the password
appears.

4

Enter your 4-digit password using the
number buttons, then press ENTER.

5

Enter a new 4-digit password using the
number buttons, then press ENTER.

6

To confirm your password, re-enter it
using the number buttons, then press
ENTER.

If you make a mistake entering your
password

Press

C before you press ENTER and input

the correct number.

Controlling Your TV or AV
Amplifier (Receiver) With
the Supplied Remote

By adjusting the remote signal, you can
control your TV with the supplied remote. If
you connect the player to an AV amplifier
(receiver), you can control the volume with
the supplied remote.

Notes

• Depending on the connected unit, you may not be

able to correctly control your TV or AV amplifier
(receiver) using some of the buttons below.

• If you enter a new code number, the code number

previously entered will be erased.

• When you replace the batteries of the remote, the

code number you have set may be reset to the
default setting. Set the appropriate code number
again.

Controlling TVs with the remote

1

Slide the TV/DVD switch to TV.

2

While holding down [/1, press the
number buttons to select the
manufacturer’s code for your TV (see
the table below).

3

Release [/1.

Number
buttons

TV/DVD
switch

VOL +/–

[

/

1

TV/VIDEO

ENTER

,

continued

Advertising