Sony DSC-W90 - Manual (Page 46)

46
Shooting menu For details on the operation 1 page 35
• For details on the white balance, see page 9.
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you
select [Fluorescent Light 1], [Fluorescent Light 2], [Fluorescent Light 3].
• Except in [Flash] modes, [White Bal] is set to [Auto] when the flash strobes.
Adjusts the amount of flash light.
• To change flash mode, see page 24.
The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.
(Flash) Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
Flash Level: Adjusting the amount of
flash light
(–) Toward –: Makes the flash level lower.
(Normal)
(+) Toward +: Makes the flash level higher.
Red Eye Reduction: Reducing the red-eye
phenomenon
(Auto) Reduces the red-eye phenomenon whenever necessary, only
when using the Face Detection Function.
(On) The flash always strobes to reduce the red-eye phenomenon.
(Off) Does not use Red Eye Reduction.