Sony HCD-GX40 - Manual (Page 10)

10 GB
Setting the clock
1
Press ?/1 to turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
3
Press . or > on the remote
repeatedly to set the hour.
4
Press ENTER on the remote.
The minute indication flashes.
5
Press . or > on the remote
repeatedly to set the minute.
6
Press ENTER on the remote.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET on the remote.
2 Press . or > on the remote to select
“CLOCK SET”, then press ENTER on the
remote.
3
Do the same procedures as step 3 to 6
above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
When you play a CD
single (8 cm CD),
place it on the inner
circle of the tray.
To insert additional discs, press DISC
SKIP/EX-CHANGE to rotate the disc tray.
3
Press Z OPEN/CLOSE to close the disc
tray.
CD
Loading a CD
1
Press Z OPEN/CLOSE.
The disc tray opens.
2
Place a CD with the label side up on the
disc tray.