Sony HCD-GX40 - Manual (Page 12)

12 GB
Programing CD tracks
— Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want to play
them.
1
Press CD.
2
Press PLAY MODE on the remote
repeatedly until “PGM” appears in the
display.
3
Press one of DISC 1 – 3 to select a CD.
To program all the tracks on a CD at once,
proceed to step 5 with “AL” displayed.
4
Press . or > until the desired
track appears in the display.
Disc tray number
Total playing time
(including selected track)
Selected track number
5
Press ENTER on the remote.
The track is programed. The program step
number appears, followed by the total
playing time.
Other discs 3 and 5
Other tracks on the
same disc 4 and 5
Other tracks on other
discs 3 to 5
7
Press H (or N on the remote).
Other Operations
To Do this
Cancel Program
Play Press PLAY MODE on the
remote repeatedly until “PGM”
and “SHUF” disappear.
Clear a track from
the end Press CLEAR on the remote in
stop mode.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD,
then press H (or N on the remote).
• “--.--” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
6
Program additional discs or tracks.
To program Repeat steps