Attaching the plate unit to the wall – Sony KLV-30XBR900 User Manual
Page 2
2
3
4
While one person holds the stand
down firmly, two people should lift
the display straight up to disengage
the hooks (at four places) from the
vertical plate of the stand.
Note
If the stand isn’t held down while the display is being
lifted, the stand will be raised along with the display, and
this can be dangerous.
Remove the two fixing screws from
the two lower holes near the upper
portion of the Mounting Hook Unit,
and then re-insert and tighten them in
the two upper holes as shown in the
diagram.
Following the instructions given in
“Step 4: Install the Display Unit” on
page 11 (US) of the Instructions, attach
the display to the Wall-Mount Bracket.
Supplementary instructions for installing an LCD Color TV
During installation, follow the supplementary instructions given below, as well as those in the supplied Instructions, to
ensure proper installation.
Attaching the plate unit to the wall
(supplementary instruction for step 3)
When attaching an LCD Color TV display, the dimensions given in the diagram below are those required for proper
installation. Referring to “Step 3: Install the Plate Unit on the wall” on page 8 (US) of the Instructions and the diagram
below, decide on the location where the unit is to be installed.
Attaching the KLV30XBR900 to the Wall-Mount Bracket
(supplementary instruction for step 4)
Perform the procedures outlined below to remove the display from the supplied stand before performing “Step 4: Install
the Display Unit” on page 11 (US) of the Instructions.
1
Remove the two fixing screws at the
bottom of the plate as shown in the
diagram.
Save the screws for use later.
A
B
C
D
E
F
972
525
102
155
175
93
(38
9
⁄
32
)
(20
21
⁄
32
)
(4
1
⁄
32
)
(6
3
⁄
32
)
(6
7
⁄
8
)
(3
21
⁄
32
)
KLV30XBR900
Unit: mm (inches)
A
400 (15
3
⁄
4
)
330 (13)
FE
DC
35 (1
3
⁄
8
)
110
(4
11
⁄
32
)
530 (20
7
⁄
8
)
600 (23
5
⁄
8
)
B
140 (5
1
⁄
2
)
35 (1
3
⁄
8
)
110
(4
11
⁄
32
)
110
(4
11
⁄
32
)