Sony ICD-SX700D User Manual

Page 114

Advertising
background image

ICD-SX700  4-127-576-11(1)

11

GB

Symptom

Remedy

The “UPDATING 

DATABASE...” display does 

not disappear.

If the IC recorder is required to process excessive amount 

of data, “UPDATING DATABASE...” may be displayed for an 

extended period of time. This is not a malfunction of the IC 

recorder. Wait until the message disappears.

You cannot connect the IC 

recorder to a computer.

Refer to the help files of the Digital Voice Editor 3 software.

It takes time to start up 

the IC recorder.

When there are many messages stored in the IC recorder, it 

may take time to start up. This is not a malfunction. Wait until 

the stop mode display appears.

The IC recorder does not 

operate correctly.

Take out the batteries and insert them again (page 14).

The IC recorder does not 

operate.

You may have formatted the memory of the IC recorder using 

the computer. Use the IC recorder formatting function to 

format the memory (page 89).

The IC recorder is not 

recognized by your 

computer.

A folder/file cannot be 

transferred from your 

computer.

Disconnect the IC recorder from your computer and reconnect 

it.
Do not use a USB hub or USB extension cable other than the 

supplied USB connecting cable. Connect the IC recorder to 

your computer using the supplied USB connecting cable. 
Operation is not guaranteed if you use any system 

requirements other than those described on page 93.
Depending on the USB connector position, the IC recorder 

may not be recognized. If this happens, try another connector.

The file transferred from 

your computer cannot be 

played back.

The file format may differ from those that can be played back 

using the IC recorder (.mp3/.wma /.msv/.wav) (page 100). 

Check the file name.

Advertising
This manual is related to the following products: