Sony ICD-SX700D - Manual (Page 41)

ICD-SX700 4-127-576-11(1)
41
GB
Re
co
rd
in
g
The VOR function is set to “OFF” when
you purchase the IC recorder.
1
Press and hold /MENU to enter
the menu mode.
The menu mode window will be
displayed.
2
Press  or  to select “VOR,”
then press  .
3
Press  or  to select “ON,”
then press  .
4
Press  (stop) to exit the menu
mode.
5
Press  (record/pause).
“ ” and “ ” appear in the display
window.
The recording starts when the IC recorder
detects sound. The recording pauses
when no sound is detected and “ ” and
“ ” flash. When the IC recorder detects
sound again, the recording starts again.
To cancel the VOR function
Set “VOR” to “OFF” in step 3.
Notes
The VOR function is affected by the sound
around you. Set “REC LEVEL” in the menu
according to the recording conditions. If
recording is not satisfactory after you have
changed the microphone sensitivity, or for
an important recording, set “VOR” to “OFF” in
the menu.
If you press
 (record/pause) to pause
recording during VOR recording, only
“ ” flashes.
During synchronized recording (page 49),
manual recording (page 33), and pre-
recording (page 37), the VOR function does
not work.



