Sony PEG-NX60 - Manual (Page 95)

Customizing your Sony CLIÉ Handheld (Preferences) 95
Adjusting the Digitizer
You need to adjust the digitizer when performing a hard reset, the tapping
operation or scrolling does not work properly, or when you cannot adjust the
brightness of the back light or screen contrast.
1
Tap the arrow in the upper right of the Preference screen
and select Digitizer.
The Digitizer calibration screen is displayed.
This Digitizer calibration screen is exactly the same as the screen
displayed the first time you turn on your CLIÉ handheld. Follow the
on-screen instructions to adjust the digitizer.
Tip
Use the stylus perpendicular to the screen to tap targets.