AVerMedia Technologies AverEPack300 User Manual

Page 10

Advertising
background image

AVerMedia

®

AVerEPack300 User’s Manual

6

Connecting AVerEPack300 to PC’s Parallel
(Printer) or USB Port

Connecting the AVerEPack300 unit to PC’s parallel port or USB port allows you to
import and export the slide presentation to and from CompactFlash card by using the
AVerEPack300 program.

1. Connect

the

AVerEPack300 unit to PC’s parallel port or USB port.

For USB cable connection:
Plug one end of the supplied USB cable to the B-side panel of AVerEPack300
“USB” port and the other end to the PC’s USB port.
For Printer cable connection:
Plug one end of your Printer cable to the B-side panel of AVerEPack300
“Printer” port and the other end to the PC’s parallel port.

2. Plug the supplied AC Power Adapter into the C-side panel of AVerEPack300

“Power” port.

NOTE: If you are using Windows 2000, It is a requirement to use the USB

cable connection. When you connect the USB cable for the first time,

the system will automatically detect the newly installed device. On

the Digital Signature Not Found dialog box, click Yes.

WARNING: Do not connect the printer cable and the USB cable at the

same time.

Rear of Computer

D

C

B

A

Advertising