AVerMedia Technologies AverEPack300 - Manual (Page 12)

AVerMedia ® AVerEPack300 User’s Manual
8
AVerEPack300 D-Side Panel
SCART RGB Monitor
SCART
RGB Cable
(optional)
Connecting the LCD Projector
To display the slide presentation on LCD projection screen, you’ll need to
connect one end of the VGA cable (not supplied) to the D-side panel of
AVerEPack300 “VGA” port and the other end to the LCD projector
“Computer” port.
Set the DIP switch no. 2 to VGA mode located at the C-side panel of
AVerEPack300 beside the “Power” port.
Connecting a SCART RGB Monitor
If you are using a SCART RGB monitor, connect the monitor to the “SCART
RGB” port at the D-side panel of AVerEPack300 using the SCART RGB cable.
(The SCART RGB cable is an optional accessory cable with the
AVerEPack300.)
Set the DIP switch no. 2 to TV mode then
from DIP switch no. 1 switch the TV system
to PAL. The DIP switch is located at the C-
side panel of AVerEPack300 unit beside the
“Power” port.
AVerEPack300 D-Side Panel
LCD PROJECTOR
VGA Cable
(not supplied)
1 2 ON
DIP SWITCH
1 2
ON
DIP SWITCH - PAL TV SYSTEM
D
C
B
A