AVerMedia Technologies AverEPack300 - Manual (Page 15)

Chapter 3 Using the Application
11
Running the AVerEPack300 Program
To run the
AVerEPack300, click Start, select Programs, select
AVerEPack300
and then click
AVerEPack300.
Whenever you start using the
AVerEPack300 program, a Device Status
dialog box always prompt to inform you about the power and the cable
connection of the
AVerEPack300 unit to your PC.
This indicates that you have properly
connected the
AVerEPack300 unit to
your PC.
If you have inserted a CompactFlash card,
the content of the card will be displayed.
Click OK to start using the program.
This indicates that your
AVerEPack300
unit is not connected to your PC.
You may start using the application
without making the connection.
Click OK to start using the program.