AVerMedia Technologies AverEPack300 - Manual (Page 30)

AVerMedia ® AVerEPack300 User’s Manual
26
The time value settings in minutes appear as follows: 0~10, 15, 20, 30,
40, 50, 60, 90 and 120.
4. After selecting a time value, press the MENU button to close the menu.
To View the Countdown Screen Display:
1. To display the previously set time value,
press the TIMER button once. The format is
in hours:minutes:seconds.
AVerEPack300
automatically converts your settings to the
above mentioned format.
2. To start the countdown, press the TIMER button the second time.
3. You can toggle the countdown screen display on and off by pressing the
TIMER button.
Reference Function
This function allows you to store a slide into the memory and display it
anytime whenever you press the REFERENCE button.
Storing the Slide in the Memory:
1. If you are in 16-slide preview mode, select the slide you want to
store in the memory. (The designated number of the selected slide
will be highlighted in yellow and blinks.) You may also store the
fully viewed slide or single slide view in the memory.
2. Press REFERENCE button until the OK sign appear to store the
selected slide in the memory.
Note: You can only store one slide at a time. If you restore another slide,
this will replace the prevoiusly stored slide to the newly stored
slide.
Viewing the Stored Slide in the Memory:
After you have stored a slide in the memory, you can view the stored slide
anytime by pressing the REFERENCE button.
To continue viewing the previous slide before it was interrupted, press the
REFERENCE button.
0:00:30