Sony SRS-U10 - Manual

© 2006 Sony Corporation Printed in China
SRS-U10
Operating Instructions
Manual de instrucciones
D
B
A
To LINE OUT or to
headphones jack
(stereo mini jack)
Portable audio
player, etc.
to INPUT 2 jack
RK-G136 connecting cord
(optional)
CD/MD player, etc.
PC, etc.
to DC IN 6 V jack
AC power adaptor (supplied)
to wall outlet
English
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To reduce the risk of electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
To reduce the risk of fire, do not cover the ventilation of the
apparatus with newspapers, tablecloths, curtains, etc. And do not
place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not place objects
filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
CAUTION
You are cautioned that any changes or modification not expressly
approved in this manual could void your authority to operate this
equipment.
Precautions
On safety
• Before operating the system, be sure that the operating voltage
of the system is identical with that of your local power supply.
Where purchased Operating voltage
U.S.A. 120 V AC, 60 Hz
Other countries 100 – 240 V AC, 50/60 Hz
• Use only the supplied AC power adaptor .
• After operating the system with the AC power adaptor,
disconnect the AC power adaptor from the wall outlet if the
system is not to be used for an extended period of time. The
POWER switch does not turn the AC power adaptor off.
On placement
• Do not set the speakers in an inclined position.
• Do not leave the system in a location near heat sources, or in a
place subject to direct sunlight, excessive dust, moisture, rain or
mechanical shock.
On cleaning
Do not use alcohol, benzine, or thinner to clean the cabinet.
On operation
• Do not open the cabinet. Refer servicing to qualified personnel
only.
• Should any solid object or liquid fall into the system, have the
system checked by qualified personnel before operating it any
further.
• Although this system is magnetically shielded, do not leave
recorded tapes, watches, personal credit cards, or floppy disks
with magnetic coding in front of the system for an extended
period of time.
If the TV picture or monitor display is
magnetically distorted
Although this system is magnetically shielded, there may be cases
that the picture on some TV sets/personal computer sets may
become magnetically distorted. In such a case, turn off the power
of the TV set/personal computer set once, and after 15 to 30
minutes turn it on again. For the personal computer set, take the
appropriate measures such as data storage before turning it off.
When there seems to be no improvement, locate the system
further away from the TV set/personal computer set. Furthermore,
be sure not to place objects in which magnets are attached or used
near the TV set/personal computer set, such as audio racks, TV
stands, toys etc. These may cause magnetic distortion to the
picture due to their interaction with the system.
If you have any questions or problems concerning your speaker
system, please consult your nearest Sony dealer.
E
Rear
INPUT 1
C
Front
The cord length can be adjusted manually by pulling/retracting.
Stand cover holes Stand holder
Stand cover
Attach the stand cover to the stand cover hole
securely until it locks into position. Insert the stand into the stand holder, and push into the
stand cover fully to secure it.
Stand
Route the connected cable along the groove.
Identifying parts (see fig. A)
1 VOLUME control
2 POWER switch
3 Power indicator
4 Stand holder
5 INPUT 1
Connecting cord with stereo-mini plug
6 Stand cover holes
7 Tray
8 INPUT 2
9 DC IN 6 V jack
Connect the supplied AC power adaptor.
Hooking up the speakers
(see fig. B)
1 Connect the AC power adaptor to the
system.
Note on the AC power adaptor
Use only the supplied AC power adaptor. Do not use any
other AC power adaptor to avoid damaging the speakers.
Polarity of the plug
2 Connect the speaker to the source device.
When the system is connected to the monaural
jack of the source device
The sound may not come through the right side. In such a
case, use the optional* plug adaptor PC-236MS.
To connect to a stereo phone-type headphones
jack
Use the optional plug adaptor PC-234S, or optional
connecting cord RK-G138.*
* The above optional accessories are not provided in some areas.
z Hint
The tray of this system uses soft material. You can install a
portable player connected to INPUT 1 on the tray. The cord
length can be adjusted manually (~ approx.30 cm). (See fig.
C.) Note that the Auto Power function may not work
correctly if equipment that generates microwaves, such as a
mobile phone, is installed on the tray.
When using your portable player on the
stand (see fig. D)
Attach the supplied stand as shown in the illustration. This is
useful, for example, when watching a portable video player.
You can adjust the level of the stand by changing the position of
the stand cover.
Notes
• Because light, such as direct sunlight, is refracted when it
passes through the stand, and may focus in one place (as it
would by a lens), it may cause a fire to occur at the focused
point. Please keep the stand in a place not subject to a source of
light when unattended.
• If you operate a portable player with the player installed on the
stand, this unit may fall backwards. Be sure to operate the
portable player by holding it on your hand.
• Some portable players may not be installable on the supplied
stand due to their shape.
When installing your portable audio player
on the stand while the cable supplied with
the player is connected (see fig. E)
The supplied stand has a hole for connecting a cable. Attach the
stand cover in the upper position to install the portable audio
player on the stand with a cable connected to the player. The
connected cable can be tidily routed along the groove.
Listening to the sound
First, turn down the volume on this unit. When connecting the
speakers to the headphone output, turn down the volume of the
connected device.
1 Set the POWER switch to ON. (See fig. F-
1 .)
The power indicator lights up.
2 Start playing on the source device.
3 Adjust the volume.
Set the volume of the source device to moderate level, and
turn the VOLUME control on this unit.
(See fig. G. )
4 Set the POWER switch to OFF after using.
The power indicator goes off.
Notes
• If connecting the speaker to a device with a built-in radio or
tuner, radio broadcasting cannot be received or sensitivity may
be reduced significantly.
• If the source device has a bass boost function or equalizer
function, set them to off. If these functions are on, sound may
be distorted.
• If the source device’s headphone output has a line switch, better
sound will be heard if it is set to on. See the operating
instructions of the source device.
• If both the device connected to INPUT 1 and the device
connected to INPUT 2 are played at the same time, both sounds
can be heard.
Active Speaker System
2-888-389-12(1)
1 2
F
G
Attach the stand cover in the upper position.
M IN VOLUME M AX
Turning the speaker on/off
automatically
– Auto Power On/Off function
You can set the system to turn on automatically when an audio
signal is input from a source device. When the system is turned
on, the power indicator lights up.
If no signal is input for about 90 seconds or more*, the system
turns off automatically and the power indicator goes off.
* Automatic-off time may vary according to how the speaker is used.
1 Set the POWER switch to AUTO. (See fig.
F-2.)
Notes
• If the input signal level is too low, the system will not turn on
automatically.
• If a device that generates microwaves, such as a mobile phone,
is nearby, the system may be turned on unintentionally by the
device.
• If a mobile phone is connected to the system, the system may
be turned on unintentionally by noise or an incoming call.
When connecting a mobile phone, turn on/off the system
manually by the POWER switch.
• The system may not turn off automatically because of received
noise, depending on the source device.
• If no device is connected to INPUT 1, the system may not turn
off automatically, or it may turn on unintentionally.
• The beginning of the input signal may not be heard, depending
on the input signal level.
• When leaving the system unattended, set the POWER switch to
OFF to prevent malfunction.
Troubleshooting
Should you have a problem with your speaker system, check the
following list and take the suggested measures. If the problem
persists, consult your nearest Sony dealer.
No sound
• Check that both this unit and the source device are turned on.
• Turn up the volume of the unit.
• Turn up the volume of the source device as high as possible to
the extent that sound is not distorted. For details on volume
adjustment, refer to the operating instructions supplied with the
device.
• Make sure all the connections have been correctly made.
Low sound level
• Turn up the volume of the source device as high as possible to
the extent that sound is not distorted. For details on volume
adjustment, refer to the operating instructions supplied with the
device.
• Turn up the volume of the unit.
Distorted sound
• Turn down the volume of the source device to the point where
the sound is no longer distorted. For details on volume
adjustment, refer to the operating instructions supplied with the
device.
• If the source device has a bass boosts function, set it to off.
• Turn down the volume of the unit.
There is hum or noise in the speaker output.
• Make sure all the connections have been correctly made.
• Make sure none of the audio devices are positioned too close to
the TV set.
The brightness of the power indicator is
unstable.
The brightness of the power indicator may become unstable when
the volume is turned up. This is not malfunction.
The system will not turn on automatically
when the Auto Power On/Off function is on.
When connected to the headphones jack, turn up the volume of the
source device. When connected to the LINE OUT jack, set the
POWER switch to ON.
The system will not turn off automatically
when the Auto Power On/Off function is on.
• Connect a device to INPUT 1.
• Re-position the system.
• Move the source device away from the system.
• Move the system away from devices that generate strong
microwaves, such as mobile phones.
Specifications
Speaker section
Speaker system 48 mm, Full range, magnetically
shielded
Enclosure type Bass reflex
Impedance 4 Ω
Rated input power 1.8 W
Maximum input power 3.6 W
Amplifier section
Maximum output 1.8 W + 1.8 W (1 kHz, 4 Ω)
Bass Boost MEGA BASS
Input Connecting cord with stereo-mini plug
(30 cm)
× 1
Stereo mini jack × 1
Input impedance 4.7 k Ω (at 1 kHz)
General
Power DC 6 V (supplied AC power adaptor)
Dimensions (w/h/d) Approx. 270 Ч 105 Ч 110 mm
(10 3 / 4
Ч 4 1 / 4
Ч 4 3 / 8 in)
Mass Approx. 700 g (1 lb. 9 oz.), including
stand cover
Supplied accessories
Stand cover (1)
Stand (1)
AC power adaptor (1)
Operating Instructions (1)
Optional accessories
Connecting cord RK-G136, RK-G138
Plug adaptor PC-234S, PC-236MS
The above optional accessories are not provided in some areas.
Design and specifications are subject to change without notice.
This warranty is valid only in the United States.