Sony DPP-FP97 - Manual (Page 17)

17 GB
D
ire
ct
pri
n
ti
ng
This section explains how to display the images
of a memory card, an external device, or
internal memory on the printer’s LCD screen
and print the selected images (direct printing).
For how to print from an external device, see
page 48.
1
Press 1 (on/standby) to turn on the
printer.
The standby indicator of the printer lights
in yellow green. An image stored on the
memory card inserted or external device
connected is displayed on the LCD screen.
By pressing ENTER without a memory
card inserted or an external device
connected, you can display an image from
the printer’s internal memory.
2
Press g/G to display the image that
you want to print.
3
Set the print quantity.
To print one sheet of the displayed image,
skip this procedure and go on to the next
step.
Press ENTER to display the print quantity
indication. Then press f/F to specify the
number of copies and press ENTER.
4
Press PRINT.
While the PRINT button lights in green,
the printer is ready for printing. All the
images with print quantity settings are
printed.
To print multiple images
Repeat steps 2 and 3.
To change the print quantity
Display the image whose print quantity
you want to change, and press ENTER to
display the print quantity indication. Then
press f/F to set the print quantity and
then press ENTER.
If you select “0,” printing is canceled.
Notes
• Never move or turn off the printer while it is
printing; the ink ribbon may become stuck or paper
jam may occur. In case you turn off the power,
keep the paper tray inserted and turn on the printer.
After the paper is ejected, resume printing.
• Do not remove the paper tray during printing.
Otherwise, malfunction may occur.
• The print paper emerges a few times during
printing. Do not touch nor pull the emerged paper.
• If print paper is jammed, see page 76.
On selecting input
The printer is not equipped with the input select
switch. When you connect a memory card or an
external device with the printer, the images of
the connected memory card or external device
are displayed automatically. If multiple
memory cards or an external device are
connected, the media first connected has the
priority. The images in the internal memory are
displayed when you press ENTER without
inserting a memory card or connecting an
external device.
When you turn on the printer with multiple
media being inserted or connected, the printer
detects the media in the order of “Memory
Stick” media, CompactFlash card, SD memory
Card, xD-Picture Card, the external device
connected to PictBridge/EXT INTERFACE
connector, and the computer.
Printing selected images